H-beam is a new type of steel for economic construction. H-beam has economical and reasonable cross-sectional shape, good mechanical properties, uniform extension of each point on the cross-section and small internal stress during rolling. Compared with ordinary I-beam, H-beam has the advantages of large cross-sectional modulus, light weight and metal saving, which can reduce the building structure by 30-40%. In addition, because its legs are parallel to the inner and outer sides and the leg ends are right angles, the welding and riveting work can be saved by 25%. It is often

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide

Channel steel is a long strip of steel with a groove-shaped section, which is a carbon structural steel for construction and machinery. It is a section steel with a complex section, and its section shape is groove-shaped. Channel steel is mainly used for building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.

Angle steel, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other. Angle steel can be composed of different force components according to the different needs of the structure, and can also be used as a connector between components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, and warehouse shelves.

Stainless steel I-beams are made of 201(1Cr17Ni5Mn6N), 202(2 Cr13Mn9Ni4), 301(1 Cr17Ni7), 303(Y1Cr18Ni9), 304(OCr18Ni9), 304L (03 Cr19Ni10), 316(0 Cr17Ni12Mo2), 316L(00 Cr17Ni14Mo2), 321 (1 Cr18Ni9Ti), 420( 2cr13), 310S(0 Cr25Ni20), etc. The chemical composition of stainless steel I-beams belongs to general structural rolled steel series, the main test indexes were C, Mn, P and S. According to different grades, the content varies, the approximate range is C<0.08%, Mn: 2.0, P<0.035%, S<0.03%. Materials are widely used in hardware products, medical

Steel sheet piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.

H-beam is a more optimized cross-sectional area distribution, more reasonable than the economic section of high-efficiency profiles, because of its section and the English letter "H" the same name. Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structure in all directions, and has been widely used.

(1) Aluminum foil surface is clean, sanitary, no bacteria or micro-organisms can not grow on its surface.
(2) aluminum foil is a non-toxic packaging material, it can directly contact with food without any harm to human health.
(3) aluminum foil is a kind of tasteless odorless packaging material, will not make the packaging of food have any peculiar smell.
(4) aluminum foil itself is not volatile, it itself and packaged food will never dry or shrink.
(5) at high temperature or low temperature, aluminum foil will not have the phenomenon of oil permeability.
(6) aluminum foil is a kind of opaque packaging material, so it is a kind of good packing material for the products of sunlight irradiation.
(7) aluminum foil has good plasticity, so it can be used to pack all kinds of products. Can also cause any shape containers.

Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar. Extrusion is also standard for wall and window trim as a cosmetic and structural framing component. The raw material typically comes in billet form, which is heated and placed into part of the extrusion press called the container. A die stack sits on the other end of the container, forming the opening, which shapes the material to the desired shape using direct or indirect extrusion methods. The extrusion is then quenched, straightened, sawed to the specified length, and inspected for dimensional consistency and accuracy. Extruded products can easily be post-processed to add features outside the channeled profile.

Product Quick Details:
● Place of Origin: China, Anping
● Certification: ISO9001
● MOQ 50pcs
● Packaging Details: folded and packed in wooden pallet
● Delivery Time: stocked items: within 3 works days;
● Customized items: 7-20 days
● Payment terms: T/T, PAYPAL, Western Union, Trade Assurance
● Supply Ability: 10000 units/sqm per week
Categories: Metal Protective Wire Mesh

Item: 99.99% copper plate /copper sheet
Width: 50-2500 or as required
Thickness: 0.3-100mm or as required
Length: 1-12m or as required
MOQ: 5tons.We also can accept sample order.
Capacity: 200,000 tons/year
Shipment time: Within 10-20 workdays after receiving deposit
Standard：ASTM,DIN,JIS,BS,GB/T
Certificate：ISO,CE, SGS,BV,BIS
Weight Calculation: Weight(kg)=Thickness(mm)*Width(m)*Length(m)*Density(8.96g/cm3)
Trade Term: FOB,CIF,CFR,EXW,etc.
Price Term: T/T,L/C,Western Union,Paypal,Apple Pay,Google Pay,D/A,D/P,MoneyGram