H-beam is a more optimized cross-sectional area distribution, more reasonable than the economic section of high-efficiency profiles, because of its section and the English letter "H" the same name. Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structure in all directions, and has been widely used.

Angle steel, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other. Angle steel can be composed of different force components according to the different needs of the structure, and can also be used as a connector between components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, and warehouse shelves.

Channel steel is a long strip of steel with a groove-shaped section, which is a carbon structural steel for construction and machinery. It is a section steel with a complex section, and its section shape is groove-shaped. Channel steel is mainly used for building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.

Flat steel,refers to 12-300mm wide,3-60mm thick,rectangular section and slightly with a blunt edge of steel.Flat steel can be finished steel,can also be used as a blank for welding pipe and thin slab for rolling sheet.Main uses:flat steel as a finished material can be used for hoop iron,tools and mechanical parts,as building frame structure,escalator.

H-beam is a new type of steel for economic construction. H-beam has economical and reasonable cross-sectional shape, good mechanical properties, uniform extension of each point on the cross-section and small internal stress during rolling. Compared with ordinary I-beam, H-beam has the advantages of large cross-sectional modulus, light weight and metal saving, which can reduce the building structure by 30-40%. In addition, because its legs are parallel to the inner and outer sides and the leg ends are right angles, the welding and riveting work can be saved by 25%. It is often

I-beam is mainly divided into ordinary I-beam, light I-beam and low alloy light I-beam. Ordinary I-beam and light I-beam flanges are thick on the web plate and thin on the outside. Ordinary I-beam, light I-beam, because the cross-sectional dimensions are relatively high, narrow, so the section of the two main sleeve moment of inertia difference is large, which makes it in the scope of application has a great limitation. The use of I-beam shall be selected according to the requirements of the design drawings.

Steel sheet piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.

Flat steel,refers to 12-300mm wide,3-60mm thick,rectangular section and slightly with a blunt edge of steel.Flat steel can be finished steel,can also be used as a blank for welding pipe and thin slab for rolling sheet.Main uses:flat steel as a finished material can be used for hoop iron,tools and mechanical parts,as building frame structure,escalator.

Flat steel,refers to 12-300mm wide,3-60mm thick,rectangular section and slightly with a blunt edge of steel.Flat steel can be finished steel,can also be used as a blank for welding pipe and thin slab for rolling sheet.Main uses:flat steel as a finished material can be used for hoop iron,tools and mechanical parts,as building frame structure,escalator.